超声速来流基元叶型前缘加工误差气动敏感性分析

doi:10.13675/j.cnki. tjjs. 180650

推进技术 ›› 2019, Vol. 40 ›› Issue (10): 2235-2242.DOI: 10.13675/j.cnki. tjjs. 180650

超声速来流基元叶型前缘加工误差气动敏感性分析

陈为雄¹,王掩刚¹,马峰^1,2,刘乾¹

1.西北工业大学动力与能源学院;2.中航工业西安航空发动机集团有限公司，陕西西安;710072

发布日期:2021-08-15
作者简介:陈为雄，博士生，研究领域为叶轮机械气动热力学。E-mail：chenweixiong@mail.nwpu.edu.cn
基金资助:
国家自然科学基金 51376150;国家级重点实验室基金 JKCYS201960705国家自然科学基金（51376150）；国家级重点实验室基金（JKCYS201960705）。

Aerodynamic Sensitivity Analysis of Manufacturing Errors for Leading Edge of Supersonic Elementary Blade Profile

1.School of Power and Energy,Northwestern Polytechnical University,Xi’an 710129,China;2.AVIC Xi’an Aero Engine Group Co. Ltd.,Xi’an 710072,China

Published:2021-08-15

摘要/Abstract

摘要： 为研究叶型前缘加工误差对叶栅气动性能敏感性，以NASA Rotor 67转子70%叶高截面基元级叶型为研究对象，选择Clamped型非均匀B样条曲线实现叶型前缘数学描述。采用单因素法建立叶型前缘加工误差模型，提炼出叶片弦长误差、前缘轮廓度误差、几何进气角误差三个误差模型；随后结合L₉(3⁴)正交实验及数值模拟方法研究超声速来流条件下三维直列叶栅不同前缘误差类型对叶栅气动性能的敏感性。正交实验极差分析及显著性分析均表明：前缘轮廓度误差F_P是影响叶栅气动性能的主要影响因素(75%以上可能性)，叶栅性能随前缘轮廓度增加呈现恶化趋势，即叶型前缘越厚，叶栅总压损失越大，扩压能力越小。进一步分析轮廓度误差对叶栅性能影响机制得出：激波损失是叶栅性能随轮廓度误差加大而恶化的重要原因。

关键词: 叶栅;气动性能;转子;前缘误差;正交实验;敏感性

Abstract: The present study took 70% span elementary blade profile of NASA Rotor 67 as a research object in order to investigate the aerodynamic sensitivity of blade leading edge manufacturing errors. The Clamped non-uniform B-spline curve was selected to achieve a mathematical description of the leading edge of the elementary blade. Three leading edge error models were extracted using single-factor method, and the error models were as follows: chord error, leading edge profile error, and geometrical inlet angle error. Then the L₉(3⁴) orthogonal experiment and numerical simulation method were adopted to study the aerodynamic sensitivity of different leading edge error models to the aerodynamic performance of the three dimensional supersonic straight cascade. The range analysis and significance analysis of orthogonal experiments both show that the leading edge profile error is the main factor that affects the aerodynamic performance of the cascade (more than 75% possibility). The performance of the cascade deteriorates with the increase of the profile of the leading edge, that is, the thicker the leading edge of the blades, the larger the total pressure loss and the smaller the diffusion capacity. Further analysis of the aerodynamic influence mechanism of the profile error shows that the shock loss is the main reason for the deterioration of the cascade performance with the increase of the profile error.

Key words: Cascade;Aerodynamic performance;Rotor;Leading edge error;Orthogonal experiment;Sensitivity

陈为雄,王掩刚,马峰,刘乾. 超声速来流基元叶型前缘加工误差气动敏感性分析[J]. 推进技术, 2019, 40(10): 2235-2242.

CHEN Wei-xiong¹,WANG Yan-gang¹,MA Feng^1,2,LIU Qian¹. Aerodynamic Sensitivity Analysis of Manufacturing Errors for Leading Edge of Supersonic Elementary Blade Profile[J]. Journal of Propulsion Technology, 2019, 40(10): 2235-2242.

参考文献

[1] 郝炜, 蔺小军，单晨伟, 等. 薄壁叶片前后缘加工误差补偿技术研究[J]. 机械科学与技术， 2011， 30(9): 1446-1450.
[2] Garzon. Probabilistic Aerothermal Design of Compressor Airfoils[D]. Massachusetts: Massachusetts Institute of Technology， 2002.
[3] 陈亚莉，李美荣，宋成. 压气机叶片型面精密数控铣加工技术应用研究[J]. 航空发动机， 2016， 42(4): 93-97.
[4] Wu C Y. Arbitrary Surface Flank Milling and Flank SAM in the Design and Manufacturing of Jet Engine Fan and Compressor Airfoils[R]. ASME GT2012-68051.
[5] Klapproth John I. Approximate Relative Total Pressure Losses of an Infinite Cascade of Supersonic Blades with Finite Leading Edge Thickness[R]. NACA-RM-E9L21， 1950.
[6] Bammert K， Sandstede H. Influences of Manufacturing Tolerances and Surface Roughness of Blades on the Performance of Turbines[J]. Journal of Engineering for Gas Turbines & Power， 1976， 98(1): 29-36.
[7] Roberts W B， Suder K L， Thorp S A， et al. The Effect of Variable Chord Length on Transonic Axial Rotor Performance[J]. Journal of Turbomachinery， 2002， 124(3): 351-357.
[8] 高丽敏，蔡宇桐，曾瑞慧，等. 叶片加工误差对压气机叶栅气动性能的影响[J]. 推进技术， 2017， 38(3): 525-531.
[9] 高丽敏，蔡宇桐，郝燕平，等. 加工误差对压气机叶片气动性能影响试验研究[J]. 推进技术， 2017， 38(8): 1761-1766.
[10] Goodhand M N， Miller R J. The Impact of Real Geometries on Three-Dimensional Separations in Compressors[J]. Journal of Turbomachinery， 2012， 134(2).
[11] Wood R M， Miller D S. Impact of Airfoil Profile on the Supersonic Aerodynamics of Delta Wings[J]. Journal of Aircraft， 1986， 23(9): 695-702.
[12] Sun H， Wang M， Wang Z， et al. Numerical Simulation of Non-Uniform Roughness Distribution on Compressor Performance[J]. Journal of Marine Science and Technology， 2018， 23(2): 389-397.
[13] Saracoglu B H ， Paniagua G ， Sanchez J， et al. Effects of Blunt Trailing Edge Flow Discharge in Supersonic Regime[J]. Computers & Fluids， 2013， 88: 200-209.
[14] Wen Y L， William N D， John D C， et al. The Impact of Manufacturing Variability on High Pressure Turbine Profile Loss[R]. AIAA2018-2121.
[15] Raina A， Lee K， Farokhi S， et al. Effect of Typical Manufacturing Defects on the Performance of Small Stall-Regulated Wind Turbines[R]. AIAA2012-1156.
[16] 陆宏志，吴洋洲，陆利蓬，等. 压气机叶片前缘楔形角对前缘分离泡的影响[J]. 工程热物理学报， 2002， 23(5): 569-572.
[17] 刘火星，李凌，蒋浩康，等. 二维NACA65叶型前缘几何形状对气动性能的影响[J]. 工程热物理学报， 2003， 24(2): 231-233.
[18] Cunnan W S， Stevens W， Urasek D C. Design and Performance of a 427-Meter-per-Second-Tip-Speed Two-Stage Fan Having a 2.40 Pressure Ratio[R]. NASA-TP-1314， 1978.
[19] Urasek D C， Gorrell W T， Cunnan W S. Performance of Two-Stage Fan Having Low-Aspect-Ratio， First-Stage Rotor Blading[R]. NASA-TP-1493， 1979.
[20] Im J H ， Shin J H ， Hobson G V ， et al. Effect of Leading Edge Roughness and Reynolds Number on Compressor Profile Loss[R]. ASME GT2013-95487.
[21] 梁赟，刘火星，邹正平. 高负荷低压涡轮边界层转捩的实验研究[J]. 推进技术， 2017， 38(5): 1023-1029. (LIANG Yun， LIU Huo-xing， ZOU Zheng-ping. Experimental Investigation on Boundary Layer Transition Process in High-Lift Low-Pressure Turbines[J]. Journal of Propulsion Technology， 2017， 38(5): 1023-1029.)
[22] Anthony J S， Jerry R W， Michael D H， et al. Laser Anemometer Measurements in a Transonic Axial-Flow Fan Rotor[R]. NASA-TP-2879， 1989.
[23] Montgomery D C. 实验设计与分析[M]. 北京:人民邮电出版社， 2009.

超声速来流基元叶型前缘加工误差气动敏感性分析

Aerodynamic Sensitivity Analysis of Manufacturing Errors for Leading Edge of Supersonic Elementary Blade Profile

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价